Perfluorohexanone self-induction multiple fire extinguishing patch_Fujian Zhongcheng Ruibo Power Technology Co., Ltd.

< Back to listRB-PAD seriesPerfluorohexanone self-induction multiple fire extinguishing patch

RB-PAD series

Perfluorohexanone self-induction multiple fire extinguishing patch

Product specifications：

Specifications can be customized, usually 100×100×2mm, 100×100×3mm

Product introduction：

The self-induction fire-extinguishing paste of perfluorohexanone is designed to suppress the fire of all kinds of small electrical cabinets.lt can cover a volume of 120L.The product is composed of three layers:village Board, adhesive layer and fire-extinguishing layer, themicrocapsules of perfluorohexanone were activated and dispersed automatically at a specific temperature, and the initial fire wasextinguished by rapid cooling at a specific distance and temperature range.It is the preferred solution for fire extinguishing in smallspace. It can be installed near the easy ignition point.

Consulting products

Product Features
Technical Parameters
Application scenarios
Installation Notes

1.Through cooling, rapid fire extinguishing, can effectively solve the narrow space within the fire safety needs;

2.When the re-burning occurs, the fire can be restrained repeatedly and put out many times;

3.The utility model has the advantages of light weight, convenient installation, and only needs to be pasted near the easy ignition point；

4.For the initial fire, effectively inhibit the ignition point of 10 ~15 cm high flame;

5.The released perfluorohexanone fire-fighting gas is clean and environment-friendly, and has no influence on the surroundingequipment, human body and the environment；

6.Pure chemical products, no fault, no error, no annual inspection, no maintenance, service life & GT.10 years.

	Performance indicators	Typical values
1	Trigger temperature	120±5℃
2	Appearance quality	The color is even and flat,without obvious flow mark,crack, bubble,hole,scratch and defect,etc.
3	Jet Time	≤29s
4	High temperature performance(85±2°C/24h)	During the high temperature test，there is no false action，no softening and deformation after the test.
5	LOW temperature performance(-40±2°C/24h)	During the low temperature test,there is no false action and no brittle fracture after the test
6	Air aging resistance	No crack or other damage after test
7	Salt spray corrosion resistance	No obvious corrosion damage after the test
8	Class B fire extinguishing performance	After spraying,fire was extinguished within 28s;
9	Class A fire extinguishing performance	After spraying,fire was extinguished within 15s;after extinguishing the open fire,the fire was restrained for 10min, the space ventilation was opened, and the wood crib did not re-ignite.
10	Volume resistivity of fire extinguishing belt	≥1.0×10¹¹Ω•m
11	The volume resistivity of the fire-extinguishing belt ejecting gas	≥1.0×10¹⁰Ω•m

lt is suitable for automatic fire extinguishing of small electrical equipment cabinets in electric power,NationalRailway, Subway, new energy, mobile communication, petrochemical, metallurgy, large-scale buildings, etc.