Perfluorohexanone self-induction fire extinguisher_Fujian Zhongcheng Ruibo Power Technology Co., Ltd.

< Back to listRB-MAT seriesPerfluorohexanone self-induction fire extinguisher

RB-MAT series

Perfluorohexanone self-induction fire extinguisher

Product specifications：

Specifications can be customized, usually 600×1000×2.1mm. 1000×1000×2.1mm

Product introduction：

The self-induction fire extinguishing cover of perfluorohexanone is composed of three layers: graphite fire-retardant layer,fre-retardantadhesive layer and perfuorohexanone fire-extinguishing layer,quick cooling fire extinguishing: the fire protection layer containing graphitepolymer quickly dissipates heat and accelerates fire suppression.The utility model has the advantages of convenient construction, covering onthe cable, excellent effect in suppressing the initial fire, and is an excellent solution for the fire protection of the underground pipe gallery,bridge frame and other cables.

Consulting products

Product Features
Technical Parameters
Application scenarios
Installation Notes

1.Pure chemical products, no fault, no pollution, no false alarm, no annual inspection, no maintenance;
2.Simply cover the fire cover on the surface of cable in the bridge, it has excellent effect in the early fire suppression, easy to instal,disassemble and stretch;
3.The outer layer (fire-proof layer)quickly radiates heat to prevent external fire attack, and the iner layer fire-extinguishing layer)quickly cool tosuppress the fire caused by the cable with double protective functions,
4.Does not affect the operation of cable, with strong anti-combustion characteristics, and product stability is not affected by the externalenvironment;

	Performance indicators	Typical values
1	Trigger temperature	200±10℃
2	Appearance quality	The color is even and flat,without obvious flow mark,crack, bubble,hole,scratch and defect,etc.
3	Jet Time	≤2s
4	High temperature performance(85±2°C/24h)	During the high temperature test，there is no false action，no softening and deformation after the test
5	LOW temperature performance(-40±2°C/24h)	During the low temperature test,there is no false action and no brittle fracture after the test
6	Air aging resistance	No crack or other damage after test
7	Salt spray corrosion resistance	No obvious corrosion damage after the test
8	Class B fire extinguishing performance	Extinguish fire within 8s after spraying
9	Class A fire extinguishing performance	After spraying，fire was extinguished within 22s; after extinguishing the openfire,the fire was restrained for 10min, the ventilation was opened, and the crib did not rekindle
10	Yang fire performance	Burn the cable wrapped in a fire extinguisher for 600 seconds, open the extinguisher after the test, and the cable is intact and undamaged
11	Volume resistivity of fire extinguishing belt	≥1.0×10¹¹Ω•m
12	The volume resistivity of the fire-extinguishing belt ejecting gas	≥1.0×10¹⁰Ω•m

lt is suitable for early fire suppression and rapid fire extinguishing in electric power, rail ransit, new energy, mobile communication,petrochemical and metallurgical buildings.