Tightener_Fujian Zhongcheng Ruibo Power Technology Co., Ltd.

< Back to listRB-WTTightener

RB-WT

Tightener

Product specifications：

Top-fixed models: 3 pcs/set; side-fixed and terminal-fixed wire models 4 pcs per set (red, yellow, green, black optional)

Product introduction：

It can be used as the fastening treatment of overhead wires up to 10 kv, which can effectively improve the service life of the wires, and the insulation design can effectively solve the potential problem of electric leakage, the construction efficiency and operation Factor of safety have been greatly improved and can be applied to fixed wire in different situations. After installation, the product is neat and beautiful, and can clearly mark all phase lines to improve the efficiency of line maintenance.

Consulting products

Product Features
Technical Parameters
Application scenarios
Installation Notes

1.The installation is convenient, solves the high altitude work labor intensity and the construction efficiency low question, after the installation stable does not move, does not loose

2.Full insulation of the contact part with the conductor to solve the hidden trouble of the public safety of the line

3.The framework is made of stainless steel, weak by environmental factors, no corrosion, no rust

4.Adapt to various weather conditions except for disaster level weather, and adapt to ambient temperatures ranging from -50℃to+90℃

5.High cost-effectiveness, color and phase separation, standardized fixed line, clear and aesthetically pleasing markings

	Performance indicators	Typical values
1	Low temperature resistance	-40℃/16h，No cracking
2	Insulation material voltage rating	18kV，1min，No breakdown
3	Mechanical load test (tensile test)	≥3kN，Do not break
4	High temperature aging resistance	100℃/168h，No cracking,deformation, discoloration
5	Salt spray resistance test	5%Sodium chloride solution, 48h, No Rust

Fixation of overhead conductors and insulators of 10KV and below (terminal fixed wire, intermediate fixed wire,fixed wire at the top of the insulator, fixed wire at the side of the porcelain cross arm)