Solventless waterproof insulation repair adhesive_Fujian Zhongcheng Ruibo Power Technology Co., Ltd.

< Back to listRB-A500Solventless waterproof insulation repair adhesive

RB-A500

Solventless waterproof insulation repair adhesive

Product specifications：

200g/group (A: 160g, B: 40g)

Product introduction：

Specially for 35KV and below air switchgear, ring network cabinet and other distribution equipment to enhance insulation, avoid internal discharge and anti-arc protection of the development of innovative products, it can also be used for waterproof, anticorrosion, insulation and fire protection of cable body and joint parts, at the same time to achieve "Zero" solvent, to ensure the safety of construction and staff health, and further provide excellent flame-retardant and anti-arc characteristics, to prevent the spread of flame and arc;

Consulting products

Product Features
Technical Parameters
Application scenarios
Installation Notes

1.Excellent electrical insulation performance: Breakdown Strength > 15kv/mm, self-leveling, high film thickness, uniform thickness after coating, the insulation performance is less affected by people; The utility model can effectively strengthen the insulation of the screen-piercing bushing, the metal bus bar, etc. , and can also be used for the quick repair of the positions of the broken insulation, etc.

2.Good Flame retardant arc resistance characteristics: Flame retardant grade up to V -0, higher than the general flame retardant insulating materials

3.Innovative monolithic curing structure: room temperature curing, fully integrated, can form a "Monolithic" insulation seal shell, even in the case of long -term water, still can prevent moisture intrusion

4.Long-term anti-corrosion and weatherproof performance: using nano-modified polyurethane resin, high film thickness, dense and stable coating, especially suitable for high humidity environment operating switch equipment and long-term water-soaked cable joint protection

5.Wide compatibility: can be applied to epoxy insulation parts, copper-aluminum metal bushing, heat shrinkable sleeve surface, cable and intermediate joint outer layer, etc. , and in the long-term high temperature, corrosion, blister and other conditions still remain stable from

6.Quick and convenient installation and construction: no special tools, complete a switch cabinet insulation enhancement construction time is less than 20 minutes, resin curing time only about 1 hour

7.Environmental and health safety: 100% solid content, no volatile substances and solvents, no obvious odor, no impact on the environment and human body

	Performance indicators	Typical values
1	Breakdown strength	≥15kV/mm
2	Volume resistivity	≥1.0×10¹⁴Ω·cm
3	Vertical combustion grade	V-0
4	Salt spray corros ion res istance	1000h，No significant change
5	Waterproof grade	IPX8
6	Bunched cable combustion test type A	Fire for 40 min，Carbonation range≤1m， All burning and luminous extinguishing time≤ 1min
7	Fire resistance test	Flame temperature≥550℃， Fire supply time≥ 5min,Test voltage≥ 100V，2ACont inuous Fuse，indicator light does not turn off

ØIt is suitable for strengthening insulation and anti-arc repair of insulation structure in switchgear for distribution power supply below 35KV. It can be used for moisture-proof and repair treatment of general epoxy insulation surface to provide electrical performance and extend operating life.

ØThe internal metal busbar of switch cabinet and so on strengthens the electric insulation, as well as the ground busbar and soon carries on the anticorrosion and the insulation treatment

ØOther distribution network insulation, corrosion and waterproof applications (such as overhead line clamp insulation)

ØArc-resistant insulation repair of thousand-type transformer